0000 GAUGE (4/0 AWG) CUSTOM MADE BATTERY CABLE ASSEMBLY
Made from our premium Extreme Battery Cable which is pure OFC copper, Made in the USA and full copper AWG wire gauge sized.
Your choose your color, length and cable ends from the options above near the purchase buttons. The copper lugs (ring terminals) as well as the copper top post positive and negative battery terminals feature a tin plating which is resistant to corrosion and it superior to bare copper terminals.
The copper connectors are crimped to the battery cable using the UL approved crimping tool as specified by the manufacturer. We then seal the connection point with adhesive heat shrink tubing in the color to match the cable. The heat shrink has a melt-able glue lining to help seal your cable from air and moisture.
If you need something special with regard to the length or lugs outside the available options please send us a message and we may be able to help you out.
Extreme Battery Cable Specifications:
Gauge Stranding Copper OD Overall OD LBS/ft
6 266 0.192 in 0.39 in .189
4 420 0.252 in 0.44 in .214
2 665 0.326 in 0.51 in .302
1 836 0.360 in 0.54 in .360
1/0 1064 0.397 in 0.61 in .462
2/0 1330 0.460 in 0.66 in .530
4/0 2109 0.580 in 0.85 in .853
Table of Allowable Amperage for copper conductors 50V or less with 105C rating:
Gauge Amps Outside Amps Inside
of Engine Space of Engine Space
6 120 102
4 160 136
2 210 178
1 245 208
1/0 285 242
2/0 330 280
4/0 445 315
ABOUT THE WIRE USED:
This 4/0AWG 0000 Gauge extreme battery cable is specially designed to meet the demands of various environments while staying extremely flexible. Full AWG sized copper conductor made from 99.9% pure annealed electrolytic copper (ETP, OFC), will you get maximum power. The insulation and jacket compounds are specially formulated to stay flexible even in cold weather and carry a -49C to 105C temperature rating. The jacket is resistant to chemicals, water, abrasions, oil, sunlight and has a color coded dual extrusion jacket with a white inner insulation which would show any damage to the outer cable more clearly. This cable is rated up to 600 Volts and is suitable for use in automotive applications, solar battery bank wiring, power inverter battery cables, marine battery cables and many other applications calling for a durable yet flexible battery cable. The battery cables meet the requirements of SAE J1127 and J378 making them ABYC and US Coast Guard approved for boat and marine use.
The jacket on the cable reads as follows:
BATTERYCABLESUSA.COM 4/0 AWG MARINE SAE J378/J1127 600V (-49C to 105C) MADE IN USA
- ABYC and USCG Approved for use on boats
- SAE J1127 Approved
- SAE J378 Approved
- TPE Jacket is Very Resistant to Oil, Water, Acid, Gas, Tears and Abrasions
- The Jacket Insulation Meets UL FT1 Flame Resistance Rating
- Annealed Electrolytic Copper with Class K (Type III) Rope Lay for flexibility
- FULL AWG Copper Content
- MADE IN THE USA
- Automotive Battery Cables
- Marine / Boat Battery Cables
- Solar Battery Bank Array
- Forklift Charging Cables
- Power Inverter Cables
- Welding Cable Leads
- Amplifier Wiring
- ...and many other uses
BENEFITS OVER WELDING CABLE:
Full AWG Size Copper Conductor
TPE Jacket is Oil Resistant where EPDM on many welding cables is a poor insulator against oil
SAE Rated for Automotive and Marine Uses
BENEFITS OVER CCA POWER WIRE:
Our cable is Copper...REAL COPPER but watch out for other "CCA Cable" as CCA Means Copper Clad Aluminum so you'd be using Aluminum which is a poor conductor compared to this pure copper cable! You have to use larger sizes of aluminum CCA cable, approximately 2 sizes larger to get close to the same power delivery as real copper cable! If you care about maximum power use our cable!
FINAL POINTERS ON LUG SIZING
Most threaded stud batteries will have either a 5/16 or 3/8 inch stud. Most of the time the negative will be 5/16 so if the positive is the same size it is also 5/16, but if your battery stud is larger on the positive it will most likely be a 3/8. There are exceptions to the rule so please contact the manufacturer or measure. You can search online for bolt sizing tables which will help.
If you have questions about cable sizing and whether this is the correct size feel free to send us a message and we will do our best to answer you or at a minimum steer you in the right direction.